Comprehensive® Reverse Shoulder System Mini Humeral Tray

Continuing the legacy of engineering innovation, the Comprehensive Mini Humeral Tray provides:

1000x1000_insetimage_CompRevShoulderMiniHumeralTray
  • 40 mm diameter humeral tray, designed to address medial overhang on smaller patients, reducing likelihood of scapular notching allowing for greater range of motion.
  • Slide humeral tray laterally with respect to the stem with offset post options (+0, +3, +6 mm) designed to address medial overhang on smaller patients, allowing for greater range of motion.
  • SIM-Loc™ Technology secures the bearing to the humeral tray, and can be assembled with finger force for ease of assembly intraoperatively.
  • Robust humeral tray with increased radius on post/base intersection and thicker base.
  • Intuitive instrumentation designed to facilitate ease of use in the operating room. Instruments are laid out in the order of surgical flow.
  • Material Technologies Zimmer Biomet’s exclusive Vivacit-E® and Prolong® Highly Cross-linked Polyethylene are designed to minimize the potential for wear and oxidative degradation1-4  
  • Full Compatibility with the Trabecular Metal™ Reverse Shoulder System, with  the addition of a 40 mm Comprehensive Glenosphere. Both systems available in 36 and 40 mm glenospheres and bearings, designed to allow surgeons to mix systems to facilitate both surgeon preferences as well as address unusual/difficult cases. Mini Humeral Trays are also compatible with Segmental Revision System (SRS) and ASHCOM™ Shoulder. The ASHCOM Shoulder is an adapter that allows the combination of the Anatomical Shoulder™ Humeral Stems with the Comprehensive Trays.

Mini Humeral Trays

  • Cobalt Chrome or Titanium
  • 40 mm diameter
  • Three height options (+0, +5, +10 mm)
  • Three offset posts options (+0, +3, +6 mm)

Mini Humeral Bearings

  • Vivacit-E or Prolong Highly Cross-Linked Polyethylene
  • Three height options (+0, +3 mm or +3 Retentive)
  • SIM-Loc™ Technology
  • Final Humeral Tray/Bearing inclination angle at 57°/147°

Additional Information

Surgical Techniques

  1. Vivacit-E Vitamin E Highly Crosslinked Polyethylene Long-Term Performance for High Demand Patients.  Zimmer Technical Memo, 2014.  Literature # 97-7255-181-00 Rev 1.  (Laboratory studies are not necessarily indicative of clinical performance.)
  2. Peiserich M, et al. Retention of Mechanical Properties in a Blended Vitamin E Polyethylene After Extreme Oxidative Challenge. Poster 1060, ORS 2013 Meeting. 2013. (Laboratory studies are not necessarily indicative of clinical performance.)
  3. Mimnaugh,K. et al. 100 Million-Cycle Wear Evaluation of Crosslinked Vitamin E Grafted Polyethylene (VE-HXPE) Acetabular Liners. Paper No. 0403. ORS 2016 Annual Meeting (Laboratory studies are not necessarily indicative of clinical performance.)
  4. Zimmer Prolong Highly Crosslinked Polyethylene Brochure. Literature #: 97-5952-101-00 Rev 2. (Laboratory studies are not necessarily indicative of clinical performance.)

Legal Manufacturer:                      

Zimmer, Inc.
1800 West Center Street
Warsaw, Indiana 46580
USA

Biomet Orthopedics
P.O. Box 587
56 E. Bell Drive
Warsaw, Indiana 46581-0587
USA

 


All content herein is protected by copyright, trademarks and other intellectual property rights, as applicable, owned by or licensed to Zimmer Biomet or its affiliates unless otherwise indicated, and must not be redistributed, duplicated or disclosed, in whole or in part, without the express written consent of Zimmer Biomet.  
This material is intended for health care professionals.  Distribution to any other recipient is prohibited.
For product information, including indications, contraindications, warnings, precautions, potential adverse effects and patient counseling information, see the package insert and information on this website. To obtain a copy of the current Instructions for Use (IFU) for full prescribing and risk information, please call 1-800-348-2759, press 4 for 411 Technical Support.