A new foundation for growth.
A 3D printed titanium interbody platform featuring a scaffold structure with 70% porosity and a 7 micron roughened surface topography to foster a cellular relevant environment for adhesion and bone ingrowth.1
24 x 32, 27 x 36.
8 mm–18 mm, 10 mm–20 mm, 12 mm–20 mm.
*2 mm increments.
8˚, 14˚, 20˚.
- Open architecture with 70% porosity including varying pore sizes of 300, 500, and 700 microns that mimic cancellous bone allowing for a conducive environment for cellular activity.1,5,6,7
- Scaffolding structure provides additional surface area 2,3 and an elastic modulus similar to PEEK.8
- 7 micron surface texturing enhances the wicking nature9 and creates an environment for potential cellular adhesion.2,3,4
TrellOss-A Porous Ti Interbody System Surgical Technique Guide
TrellOss-A is a 3D printed, Porous Titanium Interbody device with aligned 300 μm, 500 μm, and 700 μm pores with a 7 μm roughened surface; TrellOss-A is designed to help achieve sagittal alignment goals with three lordotic offerings, and allow insertion versatility with three insertion options.
- McGilvray KC, Easley J, Seim HB, et al. Bony ingrowth potential of 3D-printed porous titanium alloy: a direct comparison of interbody cage materials in an in vivo ovine lumbar fusion model. Spine J 2018;18(7):1250-1260.
- Olivares-Navarrete R, Hyzy SL, Slosar PJ et al. Implant materials generate different peri-implant inflammatory factors: poly-ether-ether-ketone promotes fibrosis and microtextured titanium promotes osteogenic factors. Spine 2015;40(6):399 -404.
- Olivares-Navarrete R, Hyzy SL, Gittens RA, et al. Rough titanium alloys regulate osteoblast production of angiogenic factors. Spine J 2013;13(11):1563 -70.
- Rao PJ, Pelletier MH, Walsh WR, et al. Spine Interbody Implants: Material Selection and Modification, Functionalization and Bioactivation of Surfaces to Improve Osseointegration. Orthop Surg 2014;6:81 -89.
- Ponader S, von Wilmowsky C, Widenmayer M, et al. In vivo performance of selective electron beam-melted ti-6al-4v structures. J Biomed Mater Res A 2010;92A:56 -62.
- Li JP, Habibovic P, et al.: Bone ingrowth in porous titanium implants produced by 3D fiber deposition. Biomaterials 2007;28:2810.
- Karageorgiou V, Kaplan D. Porosity of 3D biomaterial scaffolds and osteogenesis. Biomaterials 2005;26(27):5474 -91.
- Permeswaran, V., (2019) Elastic Modulus Characterization of Porous Titanium TrellOss™ Structure, 2922.1-GLBL-en-REV1219, Zimmer Biomet Spine, Westminster, CO
- Permeswaran, V., (2019) Measuring the Wicking Nature of Porous Titanium TrellOss™ Structure, 2921.1-GLBL-en-REV1219, Zimmer Biomet Spine, Westminster, CO
Nexxt Spine, LLC
14425 Bergen Blvd, Suite B
Noblesville, IN 46060
All content herein is protected by copyright, trademarks and other intellectual property rights, as applicable, owned by or licensed to Zimmer Biomet or its affiliates unless otherwise indicated, and must not be redistributed, duplicated or disclosed, in whole or in part, without the express written consent of Zimmer Biomet.
This material is intended for health care professionals. Distribution to any other recipient is prohibited.
For product information, including indications, contraindications, warnings, precautions, potential adverse effects and patient counseling information, see the package insert and information on this website. To obtain a copy of the current Instructions for Use (IFU) for full prescribing and risk information, please call 1-800-348-2759, press 4 for 411 Technical Support.