NCB® Polyaxial Locking Plate System

These next-generation locking plates enhance flexibility during surgery, with polyaxial screw placement (30°) cone and improved angular stability. Equipped with a locking screw technology, the MIS enabled NCB® Polyaxial Locking Plate System offers options to deal with complex fractures of the proximal humerus, the distal femur and the proximal tibia. All NCB Plates are made of Protasul® 64 Titanium Alloy.

Polyaxiality

The NCB Plate Technology allows polyaxial screw placement (30° cone) with screw locking achieved through the use of locking caps that are threaded into the plate holes. The locking construct improves stability especially in poor bone quality.

Bone Quality Feedback

In all NCB plates, the angular stability is achieved using the NCB locking caps over the NCB screws. NCB screws are not threaded into the NCB plates which allows surgeons to get tactile feedback of bone quality when tightening NCB screws.

Fracture Reduction

Before locking, NCB screws can act as lag screws. Therefore, NCB screws can be used for fracture reduction and apply inter-fragmental compression.

Non-Contact Bridging

In the locked mode the NCB plate acts as an internal fixator without contact between the plate and the bone surface, which may reduce the risk of impairment to the periosteal blood supply. This Non-Contact Bridging concept can also be controlled through the use of 1, 2 or 3mm spacers, which are threaded into the plate holes prior to plate insertion.

Enhanced Diaphyseal Fixation

Divergent screw alignment for increased pull-out resistance in the diaphyseal region, even with the MIS targeting device.

Screw Options

The NCB screws (solid and cannulated) are available with different types of screw thread, for cortical or cancellous bone. The screws designed for cortical bone have an increased core diameter and are machine-tooled with a double lead thread for fast insertion. Cannulated screws can be placed with high precision – no pre-drilling is required as they are self-drilling and self-tapping 4.5mm cancellous and 4.0mm cortical screws are available.

MIS Technique

The percutaneous plate and screw insertion technique continues Zimmer Biomet’s success in devising Minimally Invasive Solutions procedures. Requiring a smaller than normal incision, there is less damage to surrounding soft tissue and reduced risk of complications with wound healing.1,2,3

Cable Fixation Options

The products from the Cable-Ready® Cable Grip System are compatible with the NCB Polyaxial Locking Plate System.

NCB Proximal Tibia Plate

Two versions of the NCB PT Plate are available:

2 proximal and 3 proximal holes. Plate head has 6° posterior tilt to match the lateral tibial contour.

NCB Distal Femur Plate

The polyaxiality of the system allows some varus/valgus correction during surgery. For this purpose insert 4 screws as shown in the figure without tightening the screws. Place the 2 distal screws anterior and posterior.

Now the fracture can be reduced by rotation around the bone axis of the proximal fragment and varus/valgus correction of the distal fragment.

Legal Manufacturer:

Zimmer, Inc.
1800 West Center Street
Warsaw, Indiana 46580 USA


All content herein is protected by copyright, trademarks and other intellectual property rights, as applicable, owned by or licensed to Zimmer Biomet or its affiliates unless otherwise indicated, and must not be redistributed, duplicated or disclosed, in whole or in part, without the express written consent of Zimmer Biomet.  
This material is intended for health care professionals.  Distribution to any other recipient is prohibited.
For product information, including indications, contraindications, warnings, precautions, potential adverse effects and patient counselling information, see the package insert and information on this website.