A.L.P.S.® Minimally Invasive (MIS) & Mesh Calcaneus Plating System

  • MIS Design aiming to reduce Soft Tissue Interruption 
  • Designed to Meet the Stress Requirements of the Trabecular Anatomy of the Calcaneus
  • Anatomic Shape should allow Screw Trajectories to Correspond to the Complicated Anatomy of the Calcaneus
  • Anatomic Screw Trajectories aims to Maximize Screw Position and Limit Intra-articular and Neurovascular Compromise 


The A.L.P.S. Minimally Invasive & Mesh Calcaneus Plating System offers two unique anatomically contoured plate designs that address a variety of calcaneus fractures. The MIS plates are specifically designed for a small incision using a sinus tarsi approach. The mesh plates combine an MIS plate design with a locking calcaneus plate design that address comminuted fractures that require plate strength and the ability to insert screws around the perimeter of the plate. 

The MIS plate is designed to meet the needs of a variety of calcaneus fractures. Small and large standard plates are designed for intra-articular fractures of the calcaneus, whereas the small extended 2-hole, large extended 2-hole, and large extended 3-hole plates are designed for more comminuted fractures that require posterior fixation. 

The Mesh plates provide an enlarged surface over the MIS plates to accommodate lateral wall comminution. The Mesh plate is a hybrid of the MIS plate and the A.L.P.S® Locking Calcaneus Plate design with additional F.A.S.T. Tabs superiorly placed and anterior F.A.S.T. Tabs that span the calcaneocuboid joint for fractures with anterior process comminution. These F.A.S.T. Tabs can be contoured as needed to fit the calcaneus anatomy and allow the surgeon to place screws into the cuboid, thus spanning the comminuted anterior process of the calcaneus. 

 

Consider these important design features:

  • MIS design includes a carbon fiber targeting guide providing for accurate plate positioning and screw purchase
  • Wide range of plate sizing options for a variety of patient anatomies
  • Can be used with multiple A.L.P.S® screw options
  • Uses A.L.P.S.instrumentation
  • Mesh plates can be used to temporarily span the calcaneocuboid joint for anterior process comminution 
  • TiMAX® proprietary surface treatment designed for a smooth, uniform surface
  • Anatomic screw trajectories designed to maximize screw position and limit intra-articular and neurovascular compromise

 

Legal Manufacturer:                      

Biomet Orthopedics
56 East Bell Drive
P.O. Box 587
Warsaw, Indiana 46581 USA


All content herein is protected by copyright, trademarks and other intellectual property rights, as applicable, owned by or licensed to Zimmer Biomet or its affiliates unless otherwise indicated, and must not be redistributed, duplicated or disclosed, in whole or in part, without the express written consent of Zimmer Biomet.  
This material is intended for health care professionals.  Distribution to any other recipient is prohibited.
For product information, including indications, contraindications, warnings, precautions, potential adverse effects and patient counseling information, see the package insert and information on this website.