Nexel® Total Elbow – An excellent Choice for Elbow Replacement

1000x1000_insetimage_Extremities_Nexel

Zimmer Biomet’s Nexel Total Elbow builds upon the original, market-leading Coonrad/Morrey Total Elbow and its 30+ year clinical heritage. It uses proprietary Vivacit-E® polyethylene bearings and advances in instrumentation to offer an excellent wear and durability properties.1-5 The bearing geometry has been redesigned to provide advancements in contact stress engineering. The Nexel Total Elbow:

  • Is available in sizes 4, 5, and 6
  • Is available in left and right configurations
  • Has ulnar and humeral components made from Tivanium® (Ti-6AI-4V) alloy
  • Includes Vivacit-E bearings to help prevent delamination, maximize oxidative stability, minimize wear, and improve mechanical properties-thereby having a 91% reduction in polyethylene wear compared to the Coonrad/Morrey elbow in laboratory testing6-10*.
  • Utilizes a semi-conforming, thicker bearing design to reduce edge-loading and stress, and maximize contact area to distribute joint-reaction forces.
  • Includes an innovative 3rd bearing in the humeral yoke for increased compressive contact area
  • Comes with a robust Co-Cr linkage system to enhance linkage durability without applying compressive loads to screws

With the Nexel Total Elbow, we’ve upgraded to we offer an excellent alternative to the Coonrad / Morrey Total Elbow. 

This device is a total elbow prosthesis designed for use with bone cement. It is available in sizes 4, 5 and 6, in left and right configurations. The Ulnar and Humeral Components are manufactured from Tivanium® (Ti-6Al-4V) alloy. The Ulnar Component has a porous coating of Ti-6Al-4V plasma spray and is curved to facilitate implantation. The Humeral Component has a porous coating of Ti-6Al-4V plasma spray and has an  anterior flange to accommodate a bone graft. The Axle-Pin and Humeral Screws are manufactured from Zimaloy® (Co-Cr-Mo) alloy. Vitamin E highly cross-linked ultra-high molecular weight polyethylene (Vivacit-E®) bearings are designed for optimal durability.

Clinically Proven Stem Design

  • Intramedullary stem geometry and anterior humeral flange is maintained from the C/M Total Elbow.
  • Humeral component finished with Tiplasma spray, which improves for fixation and stem strength
  • Low profile A/P design minimizes soft tissue interference

Modernized, Easy-to-Use Instrumentation

  • Improves efficiency and reproducibility
  • Humeral preparation system reduces stress risers through contained, circular resection and improves precision with enhanced cut-guide stability
  • Rasp tooth geometry with diamond cut pattern provides for a more efficient canal preparation
  • Includes specially designed, flexible ulnar reamers for easier ulnar canal preparation

Bearing Design Improves Contact Stress Distribution

  • Redesignedimagined elbow bearing geometry allows improvements in contact stress distribution11, 12
  • Semi-conforming bearings engineered to eliminate reduce potential for edge loading
  • Bearings fixed to the humeral component to distribute joint reaction loads over more of the bearings surfaces
  • Design includes an innovative 3rd bearing in the humeral yoke for increased compressive contact area when compared to the C/M Total Elbow, which provides load sharing for enhanced mechanical integrity
  1. Zimmer ZRR_WA_2552_12Rev2*
  2. Zimmer ZRR_WA_2407_11Rev2*
  3. Zimmer ZRR_WA_2542_12Rev2*
  4. Zimmer ZRR_WA_2598_12*
  5. Zimmer ZRR_WA_2409_11*
  6. Popoola OO, Kincaid BL, Mimnaugh K, Marqueling M. In vitro wear of ultrahigh-molecular-weight polyethylene and vitamin E blended highly crosslinked polyethylene in linked, semiconstrained total elbow replacement prostheses. Journal of Shoulder and Elbow Surgery, 2013.
  7. Oral, E. et, al. Crosslinked Vitamin E Blended UHMWPE with Improved Grafting and Wear Resistance. Poster No. 1181. ORS 2011 Meeting.
  8. Oral, E. et, al.Trace amounts of grafted vitamin E protect UHMWPE against squalene-initiated oxidation. Poster No. 1295. ORS 2011 Meeting.
  9. Rowell, S. et, al. Detection of Vitamin E in Irradiated UHMWPE by UVVisible Spectroscopy. Poster No. 1186. ORS 2011 Meeting.
  10. Wolf, C. et, al. Radiation Grafting of Vitamin E to Ultra High Molecular Weight Polyethylene. Poster No. 1178. ORS 2011 Meeting.
  11. Aldridge, III, Lightdale NR, Mallon WJ, Coonrad RW. Total elbow arthroplasty with the Coonrad/Coonrad-Morrey prosthesis. A 10- to 31-year survival analysis. J Bone Joint Surg Br 2006; 88:509-514.
  12. Zimmer ZRR_WI_1222_12*

*Laboratory testing is not necessarily indicative of clinical performance.

 

Legal Manufacturer:

Zimmer, Inc.
1800 West Center Street
Warsaw, Indiana 46580 USA


All content herein is protected by copyright, trademarks and other intellectual property rights, as applicable, owned by or licensed to Zimmer Biomet or its affiliates unless otherwise indicated, and must not be redistributed, duplicated or disclosed, in whole or in part, without the express written consent of Zimmer Biomet.  
This material is intended for health care professionals.  Distribution to any other recipient is prohibited.
For product information, including indications, contraindications, warnings, precautions, potential adverse effects and patient counseling information, see the package insert and information on this website. To obtain a copy of the current Instructions for Use (IFU) for full prescribing and risk information, please call 1-800-348-2759, press 4 for 411 Technical Support.